Download gaddsref

Transcript
Collect Routines
GADDS Software Reference Manual
/OSCILLATE=<s>..(Sample Osc) [None]
/AMPLITUDE=<n> (Amplitude) [0.0]
See Section 5.30.
/AUTOZALIGN ......(Auto Z Align)
[No]
See Section 5.30.
5.45 Collect > Scan > Master •
Place frame buffer into single
detector or dual master mode
Menu Command: Collect > Scan > Master
Accelerator: None
User Level: 3
NOTE: On failure, the algorithm proceeds to the
next target and continues collecting data.
SLAM Syntax:
SCAN /MASTER $1 /SEND_CONFIG
SCAN /MASTER is used to select single or dual
detector operation mode and to optionally
update the SLAVE configuration menu.
NOTE: Invoking SCAN /MASTER on a frame
buffer connected to a GGCS (not a SLAVE
frame buffer) may place the GGCS in an inoperable mode. The most recent release of the
GGCS software fixes this problem.
The MASTER frame buffer can function in two
modes. The default, single detector mode mimics the standard single detector system—the
SLAVE detector becomes dead weight on the
goniometer. Flood fields and fudicial plate
images are collected in single detector mode.
Alternately, the MASTER frame buffer may be
placed in dual detector mode. Here, the MASTER may send the SLAVE specific instructions:
begin collecting data, stop collecting, save
image, etc., as well as control the GGCS; how-
5 - 84
M86-E01008