Download User Manual - NETAVIS Observer -
Transcript
NETAVIS Observer 4.5 User Manual (December 2014) Observer tries to keep the FTP of all cameras of each of the two priority classes the same (high-priority cameras and lower-priority cameras). First the algorithm tries to fully record the high-priority cameras and then use what is left for the lower-priority ones, whereby all of those will reach the same FTP. However, the low priority cameras can never go below an FTP of 10%. If the low priority cameras reach a level of 10%, then the storage management process starts truncating the archives of the high priority cameras as well. Anyway, this should never happen in a normal case and is only possible if the storage space is totally insufficient for holding the programmed recordings. Since the storage management process considers recording time and not recording space for distributing the available space, it happens that the relatively small recording space of a camera with a low recording frame rate is truncated in the same proportion like the relatively big recording space of a camera with a high recording frame rate. Caution: Please be careful when you set the Priority over other cameras flag since, if storage space is short, Observer truncates the archives of all other cameras in favor of this camera. If available storage space is much too short relative to the requested storage periods of all cameras, this can lead to strongly truncated archives. 7.2 Playback of archive recordings Observer features a multitude of powerful functions for working with archives. 7.2.1 Selecting the camera and the playback period 1. Go to the main window and choose the Archive player (if the Archive player is not available, then perhaps it is disabled in the client preferences; see 2.4 Client multi-window and multi-screen operation on page 19). Either the Camera tree appears immediately or you have to push the Select camera button : 2. Select the camera from the camera tree and push Select (you can also double click a camera or drag it to the calendar view). An overview for the selected camera on the current day is displayed: Page 73 of 189