Download SECTION 8 CHIP-SELECT MODULE
Transcript
Chip-Select Module During a write transfers, these outputs indicate which bytes within a long-word transfer are being selected and which bytes of the data bus will be used for the transfer. WE[0] controls D[31:24], WE[1] controls D[23:16], WE[2] controls D[15:8] and WE[3] controls D[7:0]. These signals provide byte data-select signals that are decoded from the SIZx, A[1:0] signals in addition to the programmed port size and burst capability of the memory being accessed, as shown in Table 8-1. Table 8-1. Data Bus Byte Write-Enable Signals WE[2] WE[3] D[31:24] D[23:16] D[15:8] D[7:0] WE[0] TRANSFER SIZE PORT SIZE 8-BIT BYTE 16-BIT 32-BIT BURST 0/1 0/1 0/1 0 SIZ1 0 0 0 0 SIZ0 A1 WE[1] A0 0 0 0 1 1 1 0 1 0 1 1 1 1 1 0 0 1 1 1 1 1 0 1 1 1 0 0 0 1 1 1 0 1 1 0 1 1 1 1 0 0 1 1 1 1 1 1 0 1 1 0 0 0 1 1 1 0 1 1 0 1 1 1 1 0 1 1 0 1 1 1 1 1 1 0 0 0 0 1 1 1 0 1 0 1 1 1 1 1 0 0 1 1 1 1 1 0 1 1 1 8-BIT WORD 1 16-BIT 32-BIT 8-2 0/1 0/1 1 1 1 0 0 0 1 1 1 0 1 0 1 1 1 1 0 0 1 1 1 0 1 1 0 1 1 1 0 0 0 0 1 1 0 1 0 0 0 1 1 0 0 0 0 1 1 1 0 1 1 0 0 0 MCF5206 USERÕS MANUAL Rev 1.0 MOTOROLA