Download Here

Transcript
Copyright
Copyright 2003.
Bruker Daltonics Inc.
All Rights Reserved.
Reproduction, adaptation,
or translation without prior
written permission is
prohibited, except as
allowed under the
copyright laws.
Document History
First edition: May 2003
Printed in U.S.A.
Safety Information
Safety Class
The instrument is a Safety
Class I instrument and has
been designed and tested
in accordance with IEC
Publication 1010:
Safety Requirements for
Electrical Equipment for
Measurement, Control,
and Laboratory Use.
Class 1 LED Product
WARNING
Warranty
The information contained in Connecting an instrument
to a power source that is
this document is subject to
not equipped with a
change without notice.
protective earth contact
Bruker Daltonics Inc. makes creates a shock hazard
no warranty of any kind with for the operator and can
regard to this material,
damage the instrument.
including, but not limited to, Likewise, interrupting the
the implied warranties of
protective conductor inside
merchantability and fitness
or outside the instrument
for a particular purpose.
or disconnecting the
protective earth terminal
Bruker Daltonics Inc. is not
creates a shock hazard for
liable for errors contained
the operator and can
herein or for incidental or
damage the instrument.
consequential damages
in connection with the
WARNING
furnishing, performance
The instrument must be
or use of this material.
disconnected from its power
Bruker Daltonics Inc.
assumes no responsibility
for the use or reliability of its
software on equipment that
is not furnished by Bruker
Daltonics Inc.
source before any cover is
removed or the system is
opened.
WARNING
All connections of the
instrument must be used in
correct way. The instrument
should only be used with
the wires and cables
delivered with the system
or otherwise provided by
the manufacturer.
Noise Declaration
70 dB operator position
normal operation per
ISO 7779: 1988
Instrument Identification
Each instrument is
identified by a unique
serial numbers. These
serial number is located on
a label on the lower left side
near the rear of the
instrument.
Part Numbers
In this manual,
Bruker Daltonics Inc.
part numbers are generally
listed in parentheses after
the name of the part.
A few tools and supplies
listed have no part numbers
and are not available from
Bruker Daltonics Inc. Most
of these can be obtained
from laboratory supply
companies.
Manual part number: A5001
When corresponding with
Bruker Daltonics Inc. about
your instrument, be sure to
include the model and the
full serial number.
Write the serial number
of the instrument here for
reference.
Model:
Serial Number:
BioTOF Series Getting Started, Version 1.0
Copyright: Bruker Daltonics Inc.
Manning Park
Billerica, MA 01821 U.S.A.
Support:
FAX:
Email:
978-663-3660, Ext. 1445
978-667-5993
support@bdal.com
Internet: www.bruker.daltonics.com
ii
Getting Started, Version 1.0