Download Here
Transcript
Copyright Copyright 2003. Bruker Daltonics Inc. All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Document History First edition: May 2003 Printed in U.S.A. Safety Information Safety Class The instrument is a Safety Class I instrument and has been designed and tested in accordance with IEC Publication 1010: Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use. Class 1 LED Product WARNING Warranty The information contained in Connecting an instrument to a power source that is this document is subject to not equipped with a change without notice. protective earth contact Bruker Daltonics Inc. makes creates a shock hazard no warranty of any kind with for the operator and can regard to this material, damage the instrument. including, but not limited to, Likewise, interrupting the the implied warranties of protective conductor inside merchantability and fitness or outside the instrument for a particular purpose. or disconnecting the protective earth terminal Bruker Daltonics Inc. is not creates a shock hazard for liable for errors contained the operator and can herein or for incidental or damage the instrument. consequential damages in connection with the WARNING furnishing, performance The instrument must be or use of this material. disconnected from its power Bruker Daltonics Inc. assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Bruker Daltonics Inc. source before any cover is removed or the system is opened. WARNING All connections of the instrument must be used in correct way. The instrument should only be used with the wires and cables delivered with the system or otherwise provided by the manufacturer. Noise Declaration 70 dB operator position normal operation per ISO 7779: 1988 Instrument Identification Each instrument is identified by a unique serial numbers. These serial number is located on a label on the lower left side near the rear of the instrument. Part Numbers In this manual, Bruker Daltonics Inc. part numbers are generally listed in parentheses after the name of the part. A few tools and supplies listed have no part numbers and are not available from Bruker Daltonics Inc. Most of these can be obtained from laboratory supply companies. Manual part number: A5001 When corresponding with Bruker Daltonics Inc. about your instrument, be sure to include the model and the full serial number. Write the serial number of the instrument here for reference. Model: Serial Number: BioTOF Series Getting Started, Version 1.0 Copyright: Bruker Daltonics Inc. Manning Park Billerica, MA 01821 U.S.A. Support: FAX: Email: 978-663-3660, Ext. 1445 978-667-5993 support@bdal.com Internet: www.bruker.daltonics.com ii Getting Started, Version 1.0