Download McDATA EFCM Basic User Manual

Transcript
Viewing Performance Information
2
•
Four byte words Rx—The number of words that the port has
received.
•
Four byte words Tx—The number of words that the port has
transmitted.
•
Offline sequences Rx—The number of offline sequences (OLS)
received by this port.
•
Offline sequences Tx—The number of offline sequences (OLS)
transmitted by this port.
•
Link resets Rx—The number of link reset protocol frames
received by this port from the attached N_Port.
•
Link resets Tx—The number of link reset protocol frames
transmitted by this port to the attached N_Port.
•
Link utilization % Rx—The current receive link utilization for
the port expressed as a percentage. On 1 Gbps links, ports can
transmit or receive data at 100 MB per second. On 2 Gbps links,
ports can transmit or receive data at 200 MB per second. Link
utilization is calculated over one-second intervals.
•
Link utilization % Tx—The current transmit link utilization for
the port expressed as a percentage. On 1 Gbps links, ports can
transmit or receive data at 100 MB per second. On 2 Gbps links,
ports can transmit or receive data at 200 MB per second. Link
utilization is calculated over one-second intervals.
•
Time Spent at 0 Tx BB Credit—The amount of time that the port
has had no transmit BB_Credits available.
For the loop devices, the following statistics are also shown:
Error Statistics
•
LIPs Detected—A loop initialization primitive was detected,
which means the loop was completed.
•
LIPs Generated—A loop initialization primitive was created to
initialize a loop.
The Performance page provides the following error statistics for the
selected port:
•
Link failures—The number of link failures recorded because a
not operational sequence (NOS), protocol timeout, or port failure
was detected.
Viewing Product Information
2-17