Download McDATA E/OS Command Line Interface User Manual
Transcript
config 2 Username The username. Model The Security model. Group Name The group name. Example Index ----1 2 3 4 5 6 config.SNMP> showV3GroupTable SNMPv3 State: Enabled Username Model Group Name -------------------------------- ----- ---------User1 V1 Group1 NOTE: This command and the command show.snmp.V3GroupTable on page 22-226 has the same functionality. config.snmp.showViewTable Syntax Purpose Parameters Output Command Example showViewTable This command displays the values for the VACM views presently configured. This command has no parameters. This command displays the following switch configuration data: View Name The name of the view. Type The type of the view. Object ID The Object ID. config.snmp> showViewTable View Name -------------------------------no_access internet management Type -----------------View Excluded View Included View Included Object ID --------.1.3.6.1 .1.3.6.1 .1.3.6.1.2 CLI Commands 2-93
Related documents
Brocade M-EOSc Command Line Interface User Manual
McDATA OPENconnectors Command Line Interace User manual
McDATA OPENconnectors Command Line Interace User manual
東芝トップランナーモールド変圧器2014
User Manual
HP StorageWorks Director 2/64 base 32 port config CLI Reference Guide
McDATA OPENconnectors Command Line Interace Network Card User Manual
iPhonebook User Manual v1.0
Guide de l`utilisateur - Governance Assessment Portal
McDATA EFCM Basic User Manual
Technical Report CMU/SEI - School of Computer Science
a white labelled version of our full user manual as PDF