Download RTMD Users Guide

Transcript
More complete details about the algorithm for the real-time PSD testing method are given in Mercan and
Ricles (2005).
2.3 Hybrid Test Method
To avoid fabrication and testing of an entire structure, the hybrid PSD test method (referred to herein as
the hybrid test method) was developed (Dermitzakis and Mahin, 1985). In a hybrid PSD test, the structure
is considered as an assembly of two distinct parts:

Physical substructure (tested part of structure).

Analytical substructure (numerically modeled part of structure).
The physical substructure is experimentally tested, where its degrees of freedom are coupled to the
analytical substructure, which is the remaining part of the structure as shown in Figure 2-4. Figure 2-4
implies that the restoring forces
displacements
and
for time step
are determined from the imposed
to the physical substructure (i.e., the measured restoring forces
to the analytical substructure (i.e., calculated restoring forces
Figure 2-4 Real-time hybrid test method
).
)