Download RTMD Users Guide
Transcript
More complete details about the algorithm for the real-time PSD testing method are given in Mercan and Ricles (2005). 2.3 Hybrid Test Method To avoid fabrication and testing of an entire structure, the hybrid PSD test method (referred to herein as the hybrid test method) was developed (Dermitzakis and Mahin, 1985). In a hybrid PSD test, the structure is considered as an assembly of two distinct parts: Physical substructure (tested part of structure). Analytical substructure (numerically modeled part of structure). The physical substructure is experimentally tested, where its degrees of freedom are coupled to the analytical substructure, which is the remaining part of the structure as shown in Figure 2-4. Figure 2-4 implies that the restoring forces displacements and for time step are determined from the imposed to the physical substructure (i.e., the measured restoring forces to the analytical substructure (i.e., calculated restoring forces Figure 2-4 Real-time hybrid test method ). )