Download File - SDProget
Transcript
6 . 5 D d at t e f T e rm i n al s Pop-menu > Spac The command XS is called with a double click on the symbol (Terminal or Connector Pin), all the data associated during the design is shown. It is possible to change the Panel, the Terminal Block, the NumM, the Level Position and the Materials characteristics. Allows the substitution of the Terminal graphical symbol, between those available with the same category. The command could be called in two ways: 1 – Double click on the Terminal symbol. 2 – Select the Terminal with the right button of the mouse to open the ”Radial Menu“. Radial Menu = To close the Radial Menu Changes Levels Position To modify the connection position on the levels it is enough to press the button “Move Level Up” and ”Move Level Down” (1 Level at a time). Pressing “Exchange” it is possible to invert the position of the connections (select 2 Levels). Changes Pins Position To modify the connection position on the pins it is enough to press the button “Move Pin Up” and ”Move Pin Down” (1 Pin at a time). Pressing “Exchange” it is possible to invert the position of the connections (select 2 Pins). Button “…” is used to modify the return block (symbol used to figure the terminal on the terminal block), choosing it from the ones in 6.9 Terminal and Connectors Database. If the message Values do not coincide is displayed this is due to a discrepancy between wire and terminal numbers that you can solve using command “Ddattef “. Manual modifications to field “Usage” must comply the syntax required for this string (see “6.4 Usage“). WARNING : Avoid the use of AutoCAD commands “Properties”, “Eattedit” or “Ddatte” to modify the data. 5.7 Ddattef 206 • Spac Automazione
Related documents
Manuale di SPAC Automazione Release 2015
User Manual of SPAC Start 16
Manuale Spac Automazione 2005
Spac Automazione 2013 - User manual
Manuale di SPAC Automazione Release 2013
Manuale di SPAC Start 16
Spac Start 2008 - Manuale d`uso
COMET-AR User`s Manual
Spac Automazione 2011 - User manual
Spac Start 2005
Manuale di SPAC Start 2013
Scarica l`allegato