Download Section 6
Transcript
6.1 Diagnostic Windows
The diagnostic windows for GNIRS are EPICS dm screens which can be used to monitor
and modify EPICS variables. Type nirsStart (script located in {BASE}/bin/solaris) to
start the top dm screen and the 4 console windows that are connected to the four vxWorks
machines associated with GNIRS. The diagnostic windows are an interface to the CAD,
CAR, APPLY records (see Software Manual for definitions and explanations), and also
show the current status of the system. Several display buttons will display a menu when
right clicking with the mouse. Some of these menus are dynamically loaded, so if the
system is rebooted, or the menu is reloaded after the dm screen is already displayed, the
right click menu won’t be updated. This is easily fixed by exiting the affected window
and re-displaying it from its parent window.
The window shown below is the top-level engineering window for GNIRS.
On this window, there are four buttons that correspond to the four major components of
the system.
1. Instrument Sequencer - The instrument sequencer controls the system most
like the OCS would. It communicates with all the other systems except for
the Wavefront Sensor.
2. Components Controller - The Components Controller monitors temperature
and pressure. It also controls the mechanisms, the detector and bench
temperature, and the cryo-motors.
GNIRS Service & Calibration Manual
81
Section 6