Download User Manual
Transcript
Technical Information Basic Principles of Capacitance Measurement Selection criteria of parallel/series equivalent circuit models There are two equivalent circuit models used for capacitance measurement: parallel mode and series mode, as shown in Table E-2. You must select one of these before measurement, depending on the magnitude of reactance and the effect of the equivalent parallel resistance (Rp) and equivalent series resistance (Rs) on it. Table E-2 Parallel/Series Equivalent Circuit Models and Measurement Functions of the E4981A Measurement function of E4981A Definition of D, Q, G Parallel equivalent circuit model Cp-D, Cp-Q, Cp-G, Cp-Rp D = 1/(|2πfCp|Rp) Q = 1/D = |2πfCp|Rp G = 1/Rp Series equivalent circuit model Cs-D, Cs-Q, Cs-Rs D = |2πfCs|Rs Q = 1/D = 1/(|2πfCs|Rs) When capacitance is small: When capacitance is small, reactance is large. Therefore, the effect of Rp is greater than that of Rs. When Rs is small, its effect can be neglected compared to capacitive reactance. In this case, use the parallel equivalent circuit model shown in Figure E-6 (a). o When capacitance is large: When capacitance is large, reactance is small. Therefore, the effect of Rs is greater than that of Rp. In this case, use the series equivalent circuit model shown in Figure E-6 (b). Figure E-6 Selection of Capacitance Measurement Circuit Model Appendix E 253 E. Technical Information o Circuit model