Download Oscilloscope Programmer`s Reference

Transcript
Commands Listed in Alphabetical Order
Conditions
This command requires a DPO3COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:PARity {NONe|EVEN|ODD}
BUS:B<x>:RS232C:PARity?
Arguments
NONe specifies no parity.
EVEN specifies even parity.
ODD specifies odd parity.
BUS:B<x>:RS232C:POLarity
Sets or returns the RS-232C polarity for bus <x>, where x is the bus number.
Conditions
This command requires a DPO3COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:POLarity {NORMal|INVERTed}
BUS:B<x>:RS232C:POLarity?
Arguments
NORMal sets the RS-232C bus polarity to positive.
INVERTed sets the RS-232C bus polarity to negative.
BUS:B<x>:RS232C:RX:SOUrce
Sets or returns the RS-232 RX source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO3COMP application module.
Group
Bus
Syntax
BUS:B<x>:RS232C:RX:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:RS232C:RX:SOUrce?
MSO3000 and DPO3000 Series Programmer Manual
2-99