Download Active Braille

Transcript
HandyTech
Active Braille
Operation of the Active Braille
ElektronikGmbH
The Editor uses the following tone signals to alert you to successful actions, or to errors.
(You can turn off the tone signals in the Active Braille's Options menu.)
 Confirmation (single beep): A function has been executed successfully.
 Warning (two short, high beeps): Sounds if no input has occurred for longer than
expected, or when the display's contents have changed, for example, because a
status message has been issued. The warning signal also sounds if you attempt to
move the cursor beyond the beginning or the end of the file.
 Error (several consecutive warning beeps): Alerts you to the fact that an error
message is being displayed.
5.2.3 Entering and Deleting Text
The input keys are used to enter Braille. If you have entered a valid character, that
character is displayed at the cursor position. The cursor is represented as dots 7+8 on the
Braille display. When a character has been entered, the cursor moves to the next position.
After a character has been entered in the last position on the display, the cursor returns to
the first Braille position. The length of a line is not limited while entering text. You can
specify the end of a line at any time by pressing the [TRC] key.
To delete any character, you can either use Backspace, [SPC+1 2], to delete the character
to the left of the cursor, or Delete, [SPC+4 5], to delete the character at the cursor position.
If the delete function you entered is not possible because you are at the beginning or end
of a text file, you will hear the warning tone, which indicates that this action is not possible.
You can insert the current date into the text by entering {Ctrl+d} or [SPC+1 4 5], while
inserting the current time is effected by entering {Ctrl+t} or [SPC+2 3 4 5].
5.2.4 Reading Text
You can navigate to the left with the [TU] key and to the right with the [TD] key for reading
text. If an external keyboard is connected to the Active Braille, you can also use the
navigation keys on the keyboard. A tone indicates that you have reached the beginning or
end of the text the specific functioning of the reading keys can be customized in the
Editor's Setup menu.
If you have been reading the text and want to return to the cursor position, you can
accomplish this by simply pressing the [TLC] key. Alternatively, you can just begin to enter
text or execute other types of actions. The Active Braille will then automatically display the
area where the cursor is located. On the other hand, you can also quickly move the cursor
to your current position by using the cursor routing keys, and then continue to enter
changes there.
If a word does not fit at the end of the display, you can instruct the Editor in the Setup
menu to automatically suppress that word and display it fully on the next line after moving
the display towards the end of the file.
It is also possible to have the current character displayed in various ASCII formats
(hexadecimal, octal representation). This function is initiated with the [SPC+1 4 5 6]
(Chord D) command. To exit this display mode, simply press the [TLC] key.
Page 50