Download Cisco AS5800 Specifications
Transcript
Preface Document Organization This guide is intended primarily for the following audiences: • Customers with technical networking background and experience • Customers who support dial-in users • System administrators who are familiar with the fundamentals of router-based internetworking, but who may not be familiar with Cisco IOS software • System administrators who are responsible for installing and configuring internetworking equipment, and who are familiar with Cisco IOS software Document Organization This document describes software installation, configuration, and troubleshooting instructions, which are included in the following chapters and appendices: • Chapter 1, “Introduction” provides a functional profile of Cisco AS5800; a hardware and network topology review; Cisco IOS software fundamentals; basic startup, boot, and setup script previews; and deployment and operation strategies. • Chapter 2, “Commissioning” provides formal functional inauguration of the equipment, through systematic software configurations, to initially engage the system for data/voice call processing. • Chapter 3, “Operations” provides routine operations to configure router interfaces. • Chapter 4, “Administration” describes management protocols and Network Access Server (NAS) security and control functionality with AAA and RADIUS servers. • Chapter 5, “Maintenance” provides replacement, debugging, and troubleshooting procedures. • Chapter 6, “Provisioning” describes basic hardware and service provision considerations such as system environment requirements, physical infrastructure checklists, IP service considerations, and system upgrade procedures. • Appendix A, “Advanced Quick Reference” provides command line configurations for the advanced user and system administrator who need to rapidly modify system functionality or enhance system performance. • The glossary at the end provides useful Cisco AS5800-related terminology definitions. Document Conventions This publication uses the following conventions to display instructions and information. Note The Cisco AS5800 universal access server uses a two-bar (/) command syntax to identify component (also known as “shelf”), interface, and port locations (shelf/slot/port). The shelf identification number is the first number identified in the two-bar command syntax. Interactive examples showing prompts ( AS5800(config-line)#) are used in procedures to show exactly what the prompt should look like when you enter a command, and what happens after you enter a command. Examples showing sample output from a show running-config or show startup-config (without prompts) command are included in the configuration sections. Cisco AS5800 Operations, Administration, Maintenance, and Provisioning Guide x DOC-7810814=