Download Bosch INTEGRUS Technical data
Transcript
36 en | Installation Integrus Figure 5.13 LBB 3414/00 wall mounting bracket showing dimensions and drilling pattern The radiator (plus suspension bracket) is attached to the wall bracket by sliding the mounting bolt over the slot on the wall bracket and then tightening it (see Figure 5.14). A split pin is then inserted into a small hole in the bolt to stop it from working loose (see inset in Figure 5.14). Figure 5.14 Attaching the radiator to the wall mounting bracket The vertical angle of the radiator can be adjusted between 0 and 90° in steps of 15°. The horizontal orientation of the radiator can be adjusted by loosening the bolt then turning the radiator to the required position. 5.4.4 Ceiling mounting The radiators can be attached to the ceiling using the supplied suspension bracket. This ensures enough space for a proper air flow around the radiator. Mounting a radiator in the IOM-INT | V1.1 | 2010.12 Installation and Operation manual Bosch Security Systems B.V.