Download HP COMPAQ DC5750 Hardware reference guide
Transcript
7. Remove the power cable (1) and primary data cable (2) and secondary data cable (if necessary) (3) from the cable retainers to make it easier to access the drive. Figure 2-24 Removing Cables from Cable Retainers 8. Release the drive by pulling the green release tab away from the drive (1) and sliding the drive out of the bay (2). Figure 2-25 Removing a Hard Drive 9. 30 Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive. Chapter 2 Hardware Upgrades ENWW