Download AVT MAGIC ISDN Technical data
Transcript
W i n d o w s P C S o f t w a r e In some cases in a PABX, the old 1TR6 German national protocol can be found. Number of max. Incoming Calls The MAGIC ISDN Telephone Hybrid has a maximum of four B channels that can be called simultaneously. This equipment permits a telephone conference with four participants. When a single S0 line is connected, enter 2 here. If the second S0 line is also connected, enter 4. To prevent more than one caller dialling in simultaneously a 1 must be entered. NOTE If the individual mode is set, a maximum of 3 callers can dial in simultaneously. Auto Answer Call If there is an incoming call, the system can accept the call automatically. For this, set the appropriate check mark. To prevent calls being auto answered do not set the check mark. In the case of an incoming call, a relevant message appears on the PC. Incoming Call Signalling (Relay 1 Behaviour) The system has three relays one of which is used for external call signalling (Relay 1, see CHAPTER A2.5). The combination field permits the following settings: – always open: The relay is always open. – always closed: The relay is always closed. – System controlled: If there is an incoming call on any channel the relay is closed. Enable System Buzzer Incorrect operations or cautions can be signalled in the system by a buzzer. To turn on the warning signal, set the appropriate check mark. PAGE 33