Download 6. PRINTERS
Transcript
Input/Output Systems and Peripheral Devices The data prepared for printing are transferred into one of several accumulators. These are high-capacity memories, containing the bitmap of the image to be transferred onto the paper. To increase speed, several accumulators may be used. While one of the accumulators is used for printing, the second (or the others) may be loaded with a new page. Another processor controls the printing block and the paper-feeding system. This processor interprets the commands referring to the printing format, which will also determine the paper movement. 6.3. Inkjet Printers Inkjet printers are composed of the following main elements: Ink reservoir; Ink circulation system; Droplet generation and acceleration system; Droplet guiding system. Depending on the drop generation method, three types of inkjet printers are used: 1. Continuous jet; 2. Intermittent jet; 3. Drops-on-demand. Each of these types uses one of the following methods for droplet guiding and placement onto the paper: Electrostatic deflection; Moving the print head or the paper and guiding the jet into positions corresponding to the dots that are to be printed; Selecting the nozzles of the print head. 6.3.1. Continuous Jet Printers The droplet generation head is continuously supplied with ink under pressure by a pump. Cone-shaped nozzles are used with diameters of the order of tenths of microns, usually made from ceramic materials resistant to wear and tear (Figure 6.2). Figure 6.2. Structure of a continuous jet printer. Due to the superficial tension, the jet tends to separate into independent droplets. This process is forced by varying the pressure on the back of the nozzle with a piezoelectric crystal. Consequently, a mechanical vibration of the ink reservoir casing is produced; if this vibration is continuous, the droplets will be generated continuously. In addition to this piezoelectric method of droplet generation, the thermal method can also be used. Both methods are described in Section 6.3.4. 3