Download Atari800MacX Manual Version 3.5

Transcript
Deletes entry on position 1
B OR SETD
Adds 2 new entries at the end of the table
10.5 Atari Hardware Register Commands
ANTIC
GTIA
PIA
POKEY
Display hardware registers for a specific chip.
DLIST [startaddr]
Show the Display List starting at address startaddr . If startaddr is not specified,
it will show the display list continuing from where it was last displayed.
DLIST CURR
Show the Display List from the currently in use location.
10.6 Assembler Commands
A [startaddr]
Start simple assembler, with assembled code being stored at startaddr . The
assembler is exited by entering a blank line.
LABELS file
Load labels from an assembler output file (xasm format)
Atari800MacX Manual – Version 3.5
Page 65 of 95