Download Xylogics Terminal Server

Transcript
Parameters for the device. This view provides the
following information:
Internet Addr
The Internet Protocol (IP) address of the terminal
server.
Subnet Mask
The Internet subnet mask.
Config File
The name of the host file containing the macro
gateway/router rotary definitions for this
terminal server.
MOTD File
The host file name containing the message-of-theday (MOTD) for the terminal server.
Image File
The software file name to request for down-line
load of the terminal server.
Dump File
The software file name that received the last
terminal server memory dump.
TFTP Directory
Specifies the directory name to be prepared to all
files when booting via TFTP.
Server Capability
Defines whether the server can act as a file server
host for another server.
Disabled Modules
Defines which selected modules are disabled.
Valid arguments are All, None, or one or more of
the following names separated by commas:
Admin, LAT, PPP, SLIP, SNMP, Nameserver, Edit.
The default is None.
Preferred Load Addr
The preferred load address for terminal server.
Preferred Dump Addr
The preferred dump address for terminal server.
Load Dump Gateway
The Internet address of the gateway used when
the preferred load or dump host is on a different
network or subnet.
Load Broadcast
Setting this button to Enabled allows the terminal
server to broadcast for the Config and MOTD files
if they are not found on the preferred local host.
Broadcast Addr
The Internet address that the terminal server
uses when sending broadcasts.