Download Intermec IF2
Transcript
Chapter 5 — Using the IF2 GPIO Interfaces These methods are shown in the next examples. Switching the High Side Using IF2 Power In this example, an external indicator lamp (0.25 A maximum current) is connected to the -Output and Ground pins, and the corresponding +Output pin is connected to the +12 VDC source. +12 V +Output External indicator lamp 0.25 A maximum - Output Ground Switching the High Side Switching the Low Side Using IF2 Power For low side switching applications, the lamp power is routed to all the lamps in common and the low side of the load is routed to the switch. In this method, connect the external indicator lamp to the +Output and +12 VDC pins, and short the corresponding -Output pin to ground as shown. External indicator lamp 0.25 A maximum +12 V +Output - Output Ground Switching the Low Side of the Output Load 78 IF2 Network Reader User’s Manual