Download Dell PowerConnect 5548p Command Line Interface Guide
Transcript
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
service-policy
Use the service-policy Interface Configuration (Ethernet, VLAN, Portchannel) mode command to apply a policy map to the input of a particular
interface. Use the no form of this command to detach a policy map from an
interface.
Syntax
service-policy input policy-map-name
no service-policy input
Parameters
policy-map-name—Specifies the policy map name to apply to the input
interface. (Length: 1–32 characters)
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode
User Guidelines
Only one policy map per interface per direction is supported.
Example
The following example attaches a policy map called Policy1 to the input
interface.
Console(config-if)# service-policy input policy1
qos aggregate-policer
Use the qos aggregate-policer Global Configuration mode command to
define the policer parameters that can be applied to multiple traffic classes.
Use the no form of this command to remove an existing aggregate policer.
Syntax
qos aggregate-policer aggregate-policer-name committed-rate-kbps excessburst-byte [exceed-action {drop | policed-dscp-transmit}]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
Quality of Service (QoS) Commands
735
Related documents
ECS5510-48S Management Guide - Edge-Core
Dell 5324 Switch User Manual
Dell OpenManage Network Manager Quick Reference Guide
CLI User's Guide
Dell PowerConnect 5548p Technical White Paper
Contax IVR User`s Manual
Contax TLA30 Auto Flash Unit
Phase One P+ Series Reference Manual
Capture One 4 Users Guide
P-Series Reference Manual.indd
Automatic Assurance/Quality Control Documentation Series
CONTAX IVR Technical Guide