Download Operating instructions
Transcript
VMB 199 Part N : 9229.01 B Audio/ Video-Modulator A/V → ATV (AM) o LINE 1. Safety and operating instructions When assembling, starting-up and adjusting the modules, it is necessary to consider the system specific references in the manual instruction. The modules may only be installed and started up by authorized technical personnel. When assembling the modules into the head end, the adherence of the EMC regulations is to be secured. The assembly and wiring have to be done without voltage. All active modules may only be operated with the Headend Controller HCB x00 or Bus Extender BEB x00. The mains voltage and the operating voltage of the modules working by DC have to be in complience to the operating parameters described in the technical data. With all work the defaults of the DIN EN 50083 have to be considered. Especially the safetyrelevant execution of the DIN EN 60728-11 [1] is necessary. WEEE-Reg.-Nr. DE 50389067 2. Device variants VMB 199 9229.01 A/V → ATV (AM) Minimum software requirements for Headend Controller HCB x00: 9650.03: version 2.34* 9650.04/.05: version 3.18* 9652.01: version 3.23* 9653.01: version 3.27* 9653.02: version 3.28* * ) Updates: www.blankom.de 3. General The Audio/Video Modulator VMB 199 is a module of the B-LINE head end system which is conceived as a complete system for middle sized distrubition networks.The module generates an analog cable-TV signal (45...862 MHz) in selected standards (multi standard functionality) at the output. The module is programmed at the central control unit and is working independently afterwards. The status of the module is displayed via LEDs (see chapter 7 “Meaning of the Status LED‘s“). 2