Download Operating instructions
Transcript
EMA x08/407 Part No: 917x.xx ENCODER/ MULTIPLEXER ASI / SDI/ A/V → ASI(TS) & IP(TS) ASI / HDMI → ASI(TS) & IP(TS) 1. Installing and operating instructions 1.1 Safety instructions • When installing and commissioning the EMA, always follow the accompanying documents exactly. • The device may only be installed and set up by authorized persons. • While installing, follow the EMC regulations. • To ensure the equipment cooling, a space of at least one rack unit above and below the EMA must to be provided. • The device is provided to be installed on support rails in a 19“ cabinet. • All installation and cable connection are only allowed when the EMA is disconnected from the power supply. • Follow the provisions of DIN EN 50083, in particular, DIN EN 60728-11 [1] regarding safety must not be ignored. • The device are delivered under protection classification I . It is absolutely necessary to insert the mains plug into a fused socket. • Warning When connecting external video sources that do not match the ground potential of the EMA, potential differences can cause hum noise (potential equalization or potential separation necessary). 1.2 Contact If there are any questions or problems, please contact: BLANKOM Antennentechnik GmbH Hermann-Petersilge-Str. 1 07422 Bad Blankenburg Germany Phone: +49 (0) 3 67 41 / 60-0 Fax: +49 (0) 3 67 41 / 60-100 Service hotline: +49 (0) 7000 / BLANKOM +49 (0) 7000 / 252 65 66 e-mail: web: info@blankom.de www.blankom.de 3