Download CME 2 User Guide

Transcript
CME 2 User Guide
Digital Inputs and Outputs
6.6: Synchronizing PWM Switching Frequency
In some situations, such as when sampling small analog signals, it is desirable to synchronize the
PWM switching frequency among multiple amplifiers. In these cases, one amplifier serves as a
master for one or more slave amplifiers. The PWM sync output of the master sends a signal that is
received as a PWM sync input by each slave. To configure this, an output of the master must be
configured as PWM Sync Output and one input on each of the slaves must be configured as PWM
Sync Input.
6.7: Analog I/O
A typical Analog I/O screen is shown below. Currently, only the Xenus Plus single axis drive has
analog I/O functionality.
67
Copley Controls