Download FactoryTalk View Machine Edition User's Guide
Transcript
• • • • • FACTORYTALK VIEW MACHINE EDITION USER’S GUIDE To set up a numeric input cursor point 1. Double-click the numeric input cursor point. 2. In the object’s Properties dialog box, fill in the options on each tab: 21-32 In the General tab, specify what the cursor point looks like at run time, and whether the operator can navigate to the cursor point using the keys on the keyboard or keypad. In the Numeric tab, set up which pop-up window opens (if any), what caption (if any) will be displayed on the pop-up, the ramp value (if any), minimum and maximum values to send to the data source, whether the minimum and maximum values will be variable (from tags or expressions) or constant, decimal point settings, and display settings. In the Timing tab, set up the timing and handshake settings for the Enter key. These settings do not apply when you ramp values. For information about using Enter key handshaking, see page 21-12. In the Common tab, specify the object’s spacial properties, name, and visibility. In the Connections tab, specify the tags or expression with which the numeric input cursor point exchanges data. For information about assigning tags and expressions, see page 20-34.
Related documents
FactoryTalk® View Machine Edition User`s Guide
NewAir ACP-1400E User's Manual
User`s Guide Volume 1
FactoryTalk View Machine Edition User's Guide
FactoryTalk View Machine Edition User`s Guide
User`s Guide Volume 2
Hands-On Lab Workbook:
ViewSE-UM006 - Literature Library
Manuale dell`esercizio
Additional Resources
2711P-UM001C-EN-P, PanelView Plus Terminals User Manual