Download User Manual AFG310 and AFG320 Arbitrary Function Generator 071

Transcript
Syntax and Commands
[SOURce<n>]:
FM[:DEViation]
The [SOURce<n>]:FM[:DEViation] command sets the peak frequency deviation
of FM modulation for the channel designated by the header suffix.
The [SOURce<n>]:FM[:DEViation]? query returns the peak frequency
deviation for the channel designated by the header suffix.
On a single-channel instrument, SOURce1 or SOURce header can be valid for
designating the channel. If channel 2 is designated on the dual-channel instrument, the SOURce2 header cannot be omitted.
Group.
SOURce subsystem Command (SCPI).
Syntax.
[SOURce<n>]:FM[:DEViation] <Deviation>
[SOURce<n>]:FM[:DEViation]? [MINimum|MAXimum]
Arguments.
<Deviation>::=<NR3>[<unit>]
where
<NR3>
The peak frequency deviation ranges from 10 mHz to 8 MHz.
<unit>::=[Hz|kHz|MHz}
The argument is reset to 1.000 00 kHz when the Arbitrary Function Generator is
powered on or the *RST command is sent to this instrument.
Responses.
<Deviation>
<Deviation>::=<NR3>
The response to a query is as follows depending on the argument status:
<Argument>::=<None>
Returns the current setting
<Argument>::=<MINimum> Returns the value to the available minimum setting
<Argument>::=<MAXimum> Returns the value to the available maximum setting
Examples.
SOURce1:FREQuency:CENTer 5MHz;FM:DEViation 1MHz
sets the center frequency of the carrier wave to 5 MHz and the frequency
deviation to 1 MHz for the CH1 FM modulation.
AFG310 and AFG320 User Manual
4-43