Download Operating instructions
Transcript
Operating instructions RA 2, RA 4, RA 6, RA 8, RA 12 (H) Table of contents Table of contents Page orbitalum tools gmbh 0 About these instructions 0.1 Warning messages 0.2 Further symbols and displays 0.3 Abbreviations 1 1 2 2 1 Notes on safety 1.1 Proper use 1.2 Safety regulations 1.3 Working with safety in mind 1.4 Waste disposal / environmental protection 1.5 Further safety regulations 3 3 3 4 5 5 2 Design of the product 2.1 Standard 6 6 3 Features and scope of application 3.1 Features 3.2 Scope of applications Working range 3.2.1 Pipe materials 3.2.2 7 7 7 7 8 4 Technical specifications 4.1 Rating 9 9 5 Commissioning 5.1 Scope of delivery 10 10 6 Transport and assembly 6.1 Fitting the quick-mounting plate 6.2 Transporting and fitting the pipe cutter Transporting and fitting the RA 2, RA 4, RA 6 and 6.2.1 RA 8 Transporting and fitting the RA 12 6.2.2 11 11 12 7 Operation 7.1 Inserting the saw blade/bevel cutter 7.2 Inserting additional cutters 7.3 Adjusting the pipe diameter Saw blade without additional cutter 7.3.1 Saw blade with additional cutter 7.3.2 7.4 Adjusting the bevel cutter 7.5 Adjusting the length gauge (cut-off stop) 7.6 Selecting the motor speed 7.7 Cutting the pipe 7.8 Beveling the pipe 7.9 Simultaneous cutting and beveling 7.10 Cutting hard plastic pipes 14 15 15 16 17 18 19 20 21 22 23 25 25 8 Maintenance 8.1 Checking the oil level of the gear and topping up 28 29 (03.07) MT_RA 2-12 (H)_BA_04_790042762_03.doc 12 13 I