Download A User Guide to iSBEM - National Calculation Method

Transcript
Figure 28: The Owner Details sub-tab of the General Information tab in the General form
NB: The background information has already been entered for the Example building so there is
no tutorial task relating to the General form.
7.4. Project Database form
Each type of construction used in the building fabric is defined within the Project Database form.
Within this form, there are five main tabs (circled in Figure 29):
•
Constructions for Walls tab
•
Constructions for Roofs tab
•
Constructions for Floors tab
•
Constructions for Doors tab
•
Glazing tab
In each tab, you need to enter information on each of the different types of construction found in
the building. For example, in your building, there may be two glazing types. This is where you
enter the details of these types. Later on, during the building’s geometry definition, each of these
construction/glazing types can be assigned to particular parts of the building, i.e., envelope,
door, or window. In other words, you are not defining the walls, doors, or windows of your
building at this stage; just the characteristics of the materials used in their construction.
Clicking on the ”Check Objects assignment” button produces two reports: the Unassigned
Objects Report and the Data Summary Report. These reports can be used to check the data
entered at any stage of inputting a building into the interface. There is a “Reports” button on
each tab within the interface so it is not necessary to return to this form to access the reports.
How to double-check the data you have entered is explained at the end of this chapter (see
Section 7.9: Double-checking the data).
68
iSBEM version 4.1.e – UK Volume
28Jan13