Download BBC Microcomputer Advanced User Guide

Transcript
4
Write character attempted. This call to the net
vector is only made when enabled by OSBYTE
&D0. On entry Y is the character to be output. On
exit, if the carry flag is set the output of the
character is not passed on to the operating system.
6
Read character attempted. This call to the net
vector is only made when enabled by OSBYTE
&CF. The net system must provide a character for
processing on exit in the accumulator.
7
OSBYTE attempted. This call to the net vector is
only made if enabled with OSBYTE &CE. The entry
parameters of the OSBYTE call are held in &EF,
&F0, and &F1 for A,X and Y registers respectively.
If on exit the overflow flag is set, the user is
prevented from making the call.
8
OSWORD attempted. Exactly as call 7 (OSBYTE),
only an OSWORD call was attempted.
&0D
A line has been entered with OSWORD 1, and is
now complete. This is a warning to the net system
that it can now take over the read character input
without too much mess.
10.8 The VDU extension vector, VDUV &226,7
This vector is used whenever an unrecognised VDU command
occurs. This happens in three situations:
(1) VDU 23,n has been issued with n in the range 2. .31. The
vector is entered with the carry flag set. The accumulator
contains 'n'. Locations &31C. .&323 contain the eight parameters
always sent with the VDU 23 command.
(2) A plot command has been issued in a non-graphics mode.
(3) An unrecognised PLOT number has been used.
261