Download N6700 User's Guide - TRS
Transcript
2 Installation General Information Models Agilent Model N6700B / N6701A / N6702A N6751A / N6752A N6753A / N6754A N6761A / N6762A N6731B / N6741B N6732B / N6742B N6733B / N6743B / N6773A N6734B / N6744B / N6774A N6735B / N6745B / N6775A N6736B / N6746B / N6776A Description 400 W / 600 W / 1200W MPS Mainframe - without DC Power Modules 50 W / 100 W High-Performance Autoranging DC Power Module 300 W 20V / 60V High-Performance Autoranging DC Power Module 50 W / 100 W Precision DC Power Module 50 W / 100 W 5 V DC Power Module 50 W / 100 W 8 V DC Power Module 50 W / 100 W / 300 W 20 V DC Power Module 50 W / 100 W / 300 W 35 V DC Power Module 50 W / 100 W / 300 W 60 V DC Power Module 50 W / 100 W / 300 W 100 V DC Power Module Items Supplied Item Power Cord Ferrite Core Digital Connector Product Reference CD-ROM Automation-Ready CD-ROM 12 A Output Connector 20 A Output Connector 50 A Output Connector Small Sense Jumpers Large Sense Jumpers Sense Connector Module Cal. Certificate Description A power cord suitable for your location. Shipped w/mainframe. Installs on power cord to reduce common mode currents. One 8-pin connector for connecting signal lines to the digital port. Shipped with mainframe. Includes drivers and documentation. Shipped with mainframe. Contains Agilent IO Libraries Suite. Shipped with mainframe. One 12A, 4-pin connector plug for connecting power and sense leads. Used in all except N6731B, N6741B, N6754A, N6773A. One 20A, 4-pin connector plug for connecting power and sense leads. Only used in N6731B, N6741B, N6754A, N6773A. One 50A, 2-pin connector plug for connecting power leads. Only used in N6753A. Two small jumpers for local sensing at the output connector. Used in all except N6731B, N6741B, N6754A, N6773A. Two large jumpers for local sensing at the output connector. Only used in N6731B, N6741B, N6754A, N6773A. A 4-pin connector for connecting sense leads. Wires (p/n 5185-8847) are used for local sensing. Only used in N6753A. Part Number Call Agilent Sales & Support Office Agilent 9170-2131 Agilent 1253-6408 Phoenix Contact MC 1,5/8-ST-3,5 Agilent 5969-2914 Agilent E2094N Agilent 1253-5826 Phoenix Contact MSTB 2,5/4-STF Agilent 1253-6211 Phoenix Contact PC 4/4-ST-7,62 Agilent 1253-7187 Molex 39422-0002 Agilent 8120-8821 Phoenix Contact EPB 2-5(1733169) Agilent 0360-2935 Phoenix Contact 3118151 Agilent 1253-5830 Phoenix Contact MC 1,5/4-ST-3,5 A certificate of calibration referenced to the serial number. N/A Options Option 0L1 054 760 761 908 FLR 20 Description Manual Set. Contains User’s Guide and Service Guide. Also available as part number 5969-2939. High-speed Test Extensions. Includes digitized output measurements and output list capability. Available for Agilent Models N675xA. Included with Agilent Models N676xA. Output disconnect/polarity reversal. Disconnects the + and – output and sense terminals. Switches the + and – output and sense polarities. Not available on Models N6741B, N675xA, or N676xA. Output disconnect. Disconnects + and – output and sense terminals. Available for all Agilent Models. Rack Mount Kit. For mounting in a 19-inch EIA rack cabinet. Also available as Model N6709A. Filler module. For mainframes with less than four power modules. Also available as Model N6708A. Series N6700 User’s Guide