Download BASDEV user manual
Transcript
- Depth: - Time: millimetres, centimetres, or inches. These are used for the various supplied and infiltrated depths. minutes or hours. These are used not only for advance, cutoff, depletion and recession time, but also for the infiltration equations. The selected units are maintained throughout the program and are also saved with the file. When the program is started, default units are litres per second for flow rate, metres for basin dimensions, millimetres for infiltrated depths and minutes for time. 5.1.3 Sub-menu infiltration In the sub-menu Infiltration, you can select one of three infiltration input modes (Table 5.1).All the modes are based on the infiltration characteristics of a soil as described by the Kostiakov equation (Equation 3.1) Di = kTA where Di is the cumulative infiltration after an infiltration opportunity time T, A is the infiltration exponent and k is the infiltration constant. In BASDEV, you can enter the soil infiltration characteristics A and k indirectly by using the Modified SCS Intake Families and the Time-Rated Families, or directly by giving values to A and k. For more background information on this subject, the reader is referred to Chapter 3, Section 1.1.The default infiltration input mode is the Modified SCS family. 5.1.4 Sub-menu calculation The sub-menu Calculation is the only place in BASDEV where the input data can be entered but, before doing this, you need to select one of four different calculation modes (Table 5.1). What the first three modes have in common is that the calculated minimum infiltrated depth at the downstream end of the basin always equals the required depth. In other words, no under-irrigation will occur and there will always be over-irrigation in the upstream part. When to use the various modes is summarised below: Calculation Mode 1: Flow rate Calculation Mode 1 is primarily for design purposes when the dimensions of the basin are known and you want to know the approximate flow rate that is needed to achieve a reasonable performance. The program will also give you 52