Download Operating Instructions
Transcript
Contents 1. Technical data 1.1 1.2 1.3 1.4 1.5 1.6 1.6.1 Geometric data of types ENG and ENGS Geometric data of types EFG and EFGS Geometric data of types EN and ENS Geometric data of types EF and EFS Connecting dimensions for flanges, brake disks etc. Performance data Determination of the coupling size 4 5 6 7 8 9 10 2. General notes 11 2.1 2.2 Introduction Copyright 11 11 3. Safety notes 11 3.1 3.2 3.3 Proper use Obligations of the user Warnings and symbols used in these Instructions 11 12 12 4. Handling and storage 12 4.1 4.2 4.3 4.3.1 4.3.2 4.3.2.1 4.3.2.2 Scope of supply Handling Storage Storage of the coupling parts Storage of the elastic rings General Storage area 12 13 13 13 13 13 13 5. Technical description 14 5.1 5.2 5.3 5.4 General description Types ENG / ENGS and EFG / EFGS Types EN / ENS and EF / EFS Description of the elastic rings 14 14 15 15 6. Assembly 16 6.1 Instructions for applying the finished bore and fitting the axial retaining means, set screws and balancing Finish bore Axial fastening Balancing General information on installation Mounting the coupling parts Alignment Angular misalignment Radial misalignment Axial misalignment Permissible shaft misalignment values Assignment of tightening torques 16 16 16 16 16 16 17 18 18 19 19 20 7. Start-up 20 7.1 Procedure before start-up 20 8. Operation 20 8.1 General operating data 20 6.1.1 6.1.2 6.1.3 6.2 6.3 6.4 6.4.1 6.4.2 6.4.3 6.4.4 6.5 4 BA 3300 EN 01.04