Download Operating Instructions
Transcript
Contents 1. Technical data 4 1.1 1.2 1.2.1 1.3 1.3.1 1.3.2 1.3.3 1.3.4 Validity of rated torques Type RWB and RBS with 12.7 mm wide brake disk Type RWB Size 144-360 Type RWB and RBS with 30 mm wide brake disk Type RWB Size 144-360 Type RBS Size 144-360 Type RWB Size 400-1000 Type RBS Size 400-1000 4 4 4 6 6 7 8 9 2. General notes 10 2.1 2.2 Introduction Copyright 10 10 3. Safety notes 11 3.1 3.2 3.3 Proper use Obligations of the user Warnings and symbols used in these Operating Instructions (BA) 11 11 11 4. Transport, handling and storage 12 4.1 4.2 4.3 4.3.1 4.3.2 4.3.2.1 4.3.2.2 Scope of supply Transport and handling Storage of the coupling Storage of the coupling parts Storing the buffers General Storage area 12 12 12 12 12 12 12 5. Technical description 13 5.1 General description 13 6. Assembly 13 6.1 Instructions for applying the finished bore and fitting the axial retaining means, set screws and balancing 6.1.1 Finish bore 6.1.1.1 Parallel keyway 6.1.2 Axial securing device 6.1.3 Set screws 6.1.4 Balancing 6.2 General information on assembly and installation 6.3 Mounting the coupling parts 6.4 Alignment 6.5 Possible misalignments 6.5.1 Axial misalignment 6.5.2 Angular misalignment 6.5.3 Radial misalignment 6.5.4 Permissible shaft misalignment values for radial misalignment DKr perm. and difference in gap dimension DS1 6.6 Assignment of tightening torques 13 13 15 15 15 16 17 17 17 18 18 18 18 19 20 7. Start-up 20 7.1 Procedure before start-up 20 8. Operation 21 8.1 General operating data 21 BA 3602 EN 01.02