Download PMSoft User Manual

Transcript
PMSoft User Manual
Main program O100
Subroutine P255
G-Codes which are
imported
Motion subroutine Ox0
The users can click IL to LD on the Compile menu or on the PMSoft toolbar to transform the
instruction list into ladder diagrams. Please refer to chapter 6 for more information about editing a
ladder diagram.
OR
8.1.4 Important Points about G-codes

8-4
As long as the format of an instruction is not destroyed, leaving spaces is allowed. For example,
G01X50 Y15F20 is legal, and is equivalent to G01 X50 Y15 F20. G01X50Y15F 20 is illegal
because there are spaces between F and 20.