Download User's Guide
Transcript
15 Remote Control RIGOL 15 Remote Control The oscilloscope can be controlled remotely mainly through the following two methods. User-defined programming Users can program and control the oscilloscope by using the SCPI (Standard Commands for Programmable Instruments) commands. For more information about the commands and programming, refer to the Programming Guide. Use PC software provided by RIGOL or other manufacturers Users can use the PC software Ultra Sigma of RIGOL, Measurement & Automation Explorer of NI (National Instruments Corporation) or Agilent IO Libraries Suite of Agilent (Agilent Technologies, Inc.) to send commands to control the oscilloscope remotely. This oscilloscope can communicate with PC through USB, LAN and GPIB (with the USB-GPIB interface converter provided by RIGOL) instrument buses. This chapter will give a detailed introduction of how to use Ultra Sigma to control the oscilloscope remotely through various interfaces. For the Ultra Sigma software, please contact RIGOL salesmen or technical support. The contents of this chapter: Remote Control via USB Remote Control via LAN Remote Control via GPIB MSO4000/DS4000 User’s Guide 15-1