Download Web Browser Interface User's Guide
Transcript
AT-S63 Management Software Web Browser Interface User’s Guide 4. Click the button next to the SecurityToGroup Table entry that you want to change, and then click Modify. The Modify SNMPv3 SecurityToGroup page is shown in Figure 101. Figure 101. Modify SNMPv3 SecurityToGroup Page 5. In the Group Name field, enter a Group Name that you configured in the SNMPv3 Access Table. See “Creating an Access Table” on page 250. There are four default values for this field that are reserved for SNMPv1 and SNMPv2c implementations: defaultV1GroupReadOnly defaultV1GroupReadWrite defaultV2cGroupReadOnly defaultV2cGroupReadWrite 6. In the Storage Type field, select one of the following storage types for this table entry: Volatile Select this storage type if you do not want the ability to save an entry in the SecurityToGroup Table. After making changes to a SecurityToGroup Table entry with a Volatile storage type, the Save Config option is not displayed on the Configuration menu. NonVolatile Select this storage type if you want the ability to save an entry in the SecurityToGroup Table. After making changes to a SecurityToGroup Table entry with a NonVolatile storage type, the Save Config option is displayed on the Configuration menu. Allied Telesyn recommends this storage type. Section III: SNMPv3 261
Related documents
Web Browser Interface User's Guide
Web Browser Interface User's Guide
AT-S63 v4.1.0 Web Browser User Guide for Stand
Web Browser Interface User's Guide
Allied Telesyn International Corp AT-8524POE User`s guide
Management Software User's Guide
Management Software User's Guide
MOXA EtherDevice Server
Allied Telesis Switch AT-S79 User's Manual
AR745 Router Quick Start Guide
AR300 Series Router Quick Start Guide
9914V 9-TRACK TAPE UNIT