Download CodeVisionAVR User Manual
Transcript
CodeVisionAVR 5.12.9 Graphic LCD Functions Specific to the SSD1963 Controller The SSD1963 library functions supplied with the CodeVisionAVR Advanced license, can operate the controller in 8 and 16 bit interface modes. To obtain higher display speed, the 16 bit interface mode is recommended. In order to take full advantage of the SSD1963 controller's features the following specific functions, declared in the glcd_ssd1963.h header file, were implemented: void ssd1963_wrcmd(unsigned char cmd) Writes a command to the SSD1963 controller. Parameter: cmd command to be sent to the controller. This command may take one of the values defined in the following macros from the glcd_ssd1963.h header file: #define #define #define #define display #define #define #define #define #define #define #define #define #define #define #define #define #define #define SSD1963_CMD_NOP 0x00 /* No operation */ SSD1963_CMD_SOFT_RESET 0x01 /* Software reset */ SSD1963_CMD_GET_PWR_MODE 0x0A /* Get the current power mode */ SSD1963_CMD_GET_ADDR_MODE 0x0B /* Get the frame buffer to the panel read order */ SSD1963_CMD_GET_DISPLAY_MODE 0x0D /* Returns the display image mode status */ SSD1963_CMD_GET_SIGNAL_MODE 0x0E /* Get the current display signal mode from the peripheral */ SSD1963_CMD_ENT_SLEEP 0x10 /* Enter sleep mode */ SSD1963_CMD_EXIT_SLEEP 0x11 /* Exit from sleep mode */ SSD1963_CMD_ENT_PARTIAL_MODE 0x12 /* Enter partial display mode */ SSD1963_CMD_ENT_NORMAL_MODE 0x13 /* Enter normal display mode */ SSD1963_CMD_EXIT_INVERT_MODE 0x20 /* Exit from inverted display mode */ SSD1963_CMD_ENT_INVERT_MODE 0x21 /* Enter inverted display mode */ SSD1963_CMD_SET_GAMMA 0x26 /* Selects the gamma curve used by the display device */ SSD1963_CMD_BLANK_DISPLAY 0x28 /* Set display off, without clearing the frame buffer */ SSD1963_CMD_ON_DISPLAY 0x29 /* Set display on */ SSD1963_CMD_SET_COLUMN_ADDR 0x2A /* Set the column extent of the frame buffer accessed with the SSD1963_CMD_RD_MEM_CONT and SSD1963_CMD_WR_MEM_CONT commands */ SSD1963_CMD_SET_PAGE_ADDR 0x2B /* Set the page extent of the frame buffer accessed with the SSD1963_CMD_RD_MEM_CONT and SSD1963_CMD_WR_MEM_CONT commands */ SSD1963_CMD_WR_MEM_START 0x2C /* Transfer image information from uC to SSD1963 starting with the location specified by SSD1963_CMD_SET_COLUMN_ADDR and SSD1963_CMD_SET_PAGE_ADDR */ © 1998-2013 HP InfoTech S.R.L. Page 260
Related documents
CodeVisionAVR User Manual
CodeVisionAVR User Manual - La documentation de Thierry
CodeVisionAVR User Manual
Xvhu#Pdqxdo# - book.isito.kg(0)
Dishwasher Lave-vaisselle
Resistive Touch Sensor based Graphics Plotter on an Embedded
Digital Solutions
LMT050DNCFWU 50DNCFWU-N NCN
JARDUINO MANUAL DE USUARIO v1.2 beta
Digole Serial:UART/I2C/SPI Character/Graphic LCD
LMT056DIDFWD-ABB - topwaydisplay.com
CodeVisionAVR User Manual