Download VDO DGPS-Receiver
Transcript
dgps_e_n.qxd 02.03.99 08:21 Seite 20 CONFIGURATION AND OPERATION 3. CONFIGURATION AND OPERATION The front control panel and display, and NMEA 0183 messages are used to configure and operate the VDO DGPS-Beacon Receiver. This chapter familiarizes you with the front control panel and display, Manual Tune and Automatic Beacon Search modes, and the associated software menu system. NMEA 0183 commands and queries sent from a terminal program running on a PC computer are fully covered in Chapter 4. 3.1 Interface Protocolls The VDO DGPS-Receiver supports the following data, command, and status protocols: RTCM SC-104 differential correction message NMEA 0183 standard command and status message NMEA 0183 proprietary command and status message 3.2 Front Control Panel and Display The VDO DGPS-Receiver features a display and control panel on the front of the receiver. The display is a 10 character alphanumeric LED. The control panel is a three button keypad composed of an up arrow , an enter , and a down arrow key . You can easily navigate the VDO DGPS-Receiver menu system using these three keys, to allow operation and configuration of this receiver. The display and keypad allow you to move quickly and easily through the range of menu items in the menu tree. Figure 3-1 displays the front display and keypad of the VDO DGPS-Receiver. Figure 3-1 VDO DGPS-Receiver Front Control Panel and Display 64