Download datasheet: pdf
Transcript
GENERAL DESCRIPTION The Megger LT7 Digital loop tester is a compact portable instrument designed to measure earth loop impedance and prospective short circuit current. A special range is provided to carry out loop measurement on installations protected by Residual Current Devices ≥30mAwithout causing the breaker to trip out. The resolution in this range (1Ω) is more than adequate for this purpose. Should greater resolution be required (0.01Ω) the conventional 23Arange can be used. Features Digital LCD Low Battery Indicator Phase/Earth Voltage Indicator Retest Push button 4 Position Rotary Switch Battery Compartment Cover Thermal Protection Indicator ‘Excessive Noise’ Indicator Neutral/Earth Voltage Indicator Prospective Short Circuit Current Measurement High Current (23A) Loop Measurement Low current (15mA) Loop Measurement Battery Replacement: For safety reasons, the battery compartment must not be opened if the test lead(s) are connected. Undo the two screws in the instrument base to access the battery compartment, and replace the battery cells. The instrument will beep. Ensure that correct polarity is observed and that the cover is correctly replaced.