Download general information
Transcript
OIL PUMP REMOVAL Remove the underside paneling. Remove the fan cover, the impeller, and the generator. Remove the oil leads. After removing the supply line from the oil reservoir and the delivery line, which leads to the carburetor, both lines must be plugged with suitable plugs so that no oil can flow out. Unhook the oil pump control cable. Loosen the fastening screws of the oil pump and remove the oil pump. INSPECTION Check the oil pump for leakage. Check the O-ring, the drive sprocket and the shaft seal for wear and damage. Check the driving tab for wear. Do not dismantle the oil pump! INSTALLATION The O-ring seal has to be replaced prior to reinstalling. Provide the O-ring with clean oil. Mount the oil pump in reverse order. LB-3