Download general information
Transcript
CLUTCH GEARBOX CG-4 PINION GEAR REMOVAL Loosen and remove the circlip of the chain pinion gear by means of circlip pliers. Remove the chain pinion gear. Pull out the pinion gear and remove the circlip under the pinion gear. REMOVAL OF THE CLUTCH The proper functioning of the wet clutch depends to a great extent on the choice of the right engine oil and of the oil level. In case of a slipping clutch the quality and the fill quantity of the lubricant shall be checked prior to dismantling the engine. Compress the clutch spring fastening screws and remove the spring plate and the set of clutch disks. When disassembling the different components of the clutch, it is important to note their respective position in order to ensure that they can be properly re-assembled. Remove the clutch thrust plate, the ball, and the coupling rod from the center bore of the main shifter shaft. Coupling rod Ball and clutch pressure plate