Download "service manual"
Transcript
T31 X-TRAIL Diesel (M9R) New Model Introduction. Nissan Australia. July 2008. ENGINE CONTROL M9R Inputs to ECM 18. Differential Exhaust Pressure Sensor (DPF) The Differential Exhaust Pressure Sensor is connected to the inlet & outlet sides of the DPF unit in the exhaust system via 2 separate pressure sensor tubes (upstream and downstream). The Sensor measures the difference between the exhaust pressure before and after the DPF. The Differential Exhaust Pressure Sensor converts the difference into a voltage signal. ECM receives the signal and estimates the amount of Particulate Matter in DPF. NOTE: Additional information regarding DPF can be sourced from the Diesel Particulate Filter (DPF) Training Manual. 19. Fuel Temperature Sensor The Fuel Temperature Sensor is of a conventional Thermistor design. The sensor is located in the fuel line just prior to the fuel reaching the pump and detects the temperature of the fuel. This information is sent to the ECM which is able to make corrections in the fuel injection signal which take into account the effect that temperature has on fuel viscosity. 20. Barometric Sensor (BOSCH) The barometric pressure sensor is built into ECM. The sensor detects barometric pressure (altitude) and sends the voltage signal to the microcomputer. 46