Download TECHNICALLY SPEAKING

Transcript
TECHNICALLY SPEAKING
PAGE 2 OF 4
Considering The Entire System Pipe It In With Ease!
Our sales and marketing department
has added a new position to enhance
heating system designs which
incorporate Lochinvar products.
Paul Rohrs is filling this new position
but is not new to Lochinvar. He is
very knowledgeable about many
issues in the field and with our
products, having spent some years
as an installer, twelve years as a
hydronic system designer and most
recently as a product manager.
By Joey Foster
Using hydraulic separators
is becoming more and
more prevalent in our industry. With the recent
push to utilize green technology, and with efficiency incentives
offered by the federal government; old, high volume boilers are
being replaced with high efficiency, low volume boilers.
Paul Rohrs
Design & Application Specialist
This position will include a focus on Renewable Energies and an
emphasis on “System” based designs with Lochinvar equipment.
In addition, Paul will be introducing an online training program
as well as a tiered training program with basic, intermediate, and
advanced levels. Paul will also be available for systems based
questions pertaining to system piping that relates to Lochinvar
equipment in a system.
For assistance with solar design requests and solar quotes, send
an email request to solar@lochinvar.com. Other technical support
should be routed through our technical service department by
calling 1-800-722-2101.
Replacing equipment can be labor and time intensive. One way to save
time and make replacement easier, is to use a hydraulic separator in the
piping system. These practical components prevent flow in one circuit
from interfering with flow from another circuit. This easily accomplishes
a primary/secondary piping
Boiler Side
Connections
arrangement. There is no
Air Bleeder
Valve
need to measure and cut extra copper to make a hydraulic separation. This saves
the time and material costs
it takes to design and build
proper primary/secondary
connections. By using a hydraulic separator, installation
of new, high efficiency boilFill Valve
ers into existing applications
Piping System Side
Connections
will be faster and easier.
A hydraulic separator and cut-away view
of water flow-through
Calculating And Using A Pump Curve
When sizing the pump for a new system, graphs like the one below
can help show pump characteristics. This is a very simple pump
curve for a pump with a single impeller, one motor size, and a
consistent efficiency. By studying the graph, some of the data used
for plotting a pump curve is evident:
• Head (H)
(Don’t be intimidated, it is
actually very simple!)
By Greg Russell
H = Hmax (1- (Q/Qmax)2 )
Armed with this formula and maybe a little help from Excel, the
graph will take shape:
• Capacity (Q)
• Max. Capacity
(Qmax)
• Max. Head
(Hmax)
In this graph,
when Q = 0, H = Hmax. The same is also true when H = 0, Q = Qmax.
EXAMPLE:
To save time, some established values will be used:
Reference: http://www.lmnoeng.com/Pipes/HWpump.htm
USING THE CURVE
Qmax = 500 gpm
Hmax = 500 ft.
With these two values, use different values for Q to equate the
value of H the plot the graph. Here is the formula to use:
Spring 2012
Volume 2, Issue 3
Proper pump sizing is a critical step in designing hydronic system(s).
GPM, Feet of Head, Delta T, and BTUH are all components of sizing
a circulator for a new system. What if there is already a circulator