Download Service Manual
Transcript
RIBAO Technology CS-610S+ Service Manual When it shows ERROR 01, it means the IR transistor was blocked and you need to check the IR transistor, including the connecting cable. After the problem is solved, please press CLR key to enter into main interface. ERROR 02 TEST #220↓ #OK S2:1 S3:0 #147↑ S1:1 C0:1 C5:1 C1:1 C6:1 C2:1 C7:1 # 0 S4:1 C3:1 C8:1 C4:1 C9:1 · When it shows ERROR 02, it means the 2 nd starting electromagnet is covered by something, and you need to check this electromagnet, including the connecting cable. After the problem is solved, please press CLR key to enter into main interface (3)ERROR 03 ERROR: 03 CHECK THE SENSOR 3 · When it shows ERROR O3, it means the starting sensor for 3rd Electromagnet is blocked, and you need to check the 3rd Electromagnet, including the connecting cable, after the problem is solved, please press CLR key to enter into main interface The ERROR 02 and ERROR 03 Electromagnet are for machine with special circuit, the standard machine does not have. (4)ERROR 04 ERROR: 04 CHECK THE SENSOR 4 13