Download Engine - JLG.com

Transcript
SEBU8180-01
103
Reference Information Section
Engine Ratings
Reference Information
Section
i02945155
Engine Rating Definitions
SMCS Code: 1000
Engine Ratings
i02945156
Engine Rating Conditions
SMCS Code: 1000
All engine ratings are in compliance with the following
standard ambient air conditions of “SAE J1349”:
• 99 kPa (29.3 inches of Inches Hg)
• 30 percent relative humidity
It is important to know the use of the engine so
that the rating will match the operating profile. The
proper rating selection is also important so that the
customer’s perception of price and value is realized.
In selecting a rating for a specific application, the
most important consideration is the time that is spent
at full throttle. The rating definitions identify the
percent of time at full throttle. The definitions also
identify the corresponding times below rated rpm.
Note: For an exact determination of the appropriate
rating, follow the OEM specifications or consult your
Caterpillar dealer.
• A temperature of 25 °C (77 °F)
There is five ratings from A to E. The rating for the
C4.4 industrial engine is C.
Ratings relate to the standard conditions of
“ISO8665”, of “ISO3046/1”, of “DIN6271”, and of
“BS5514”.
C – Intermittent service in conjunction with maximum
power and/or speed are cyclic. The engine at full load
should not exceed 50 percent of the duty cycle.
Power for the engine ratings is set on the following
fuel specification:
• Density 0.837 to 0.845 kg/l at 15 °C (59 °F)
• API Gravity 36 to 37.5 at 15 °C (59 °F)
• Viscosity 2.6 to 2.8 mm^2 /sec at 40 °C (104.0 °F)
• Cetane numbers of 48 to 52
Gross Output Ratings – The total output capability
of the engine that is equipped with standard
accessories.
Standard accessories include the following
components:
• Oil pumps
• Fuel pumps
• Water pumps
Subtract the power that is required to drive auxiliary
components from the gross output. This will produce
the net power that is available for the external load
(flywheel).
NOTICE
Operating engines above the rating definitions can result in shorter service life before overhaul.