Download DRIVE SYSTEM

Transcript
DRIVE SYSTEM
6. Start the machine and raise the loader arm enough
to clear the hydraulic floor jack. Place the floor jack
directly below the mount plate and lower the loader
arm onto the hydraulic floor jack. Continue lowering
the loader arm to raise the tracks off the ground (Fig.
1265).
8. Lower the hydraulic floor jack so the machine rests
on the jack stands. Lower the loader arms to the
resting position (Fig. 1267).
Fig 1265
PICT-4250
Fig 1267
PICT-4253
9. Make sure the machine is securely supported by the
jack stands.
7. Place two jack stands under the front frame (Fig.
1266).
7-2
Fig 1266
PICT-4251
Rev. 000
TX525 Service Manual