Download Engine Identification
Transcript
WARNING Be careful not to injure your fingers or damage the alternator when adjusting the belt tension. Insert a bar or pipe between the alternator and the cylinder block. Raise the alternator to adjust the fan tension. NOTE: The belt must deflect 7 mm to 10 mm [0.28 in to 0.39 in] when pushed with fingerpressure of 6 kg [13 lb] at a point midway between the fan pulley and the crankshaft pulley. Tighten the adjustment capscrew (1). 00900257 Torque Value: Mounting Capscrew Adjustment Capscrew 31 N•m [23 ft-lb] 31 N•m [23 ft-lb] Fan Install the spacer, fan, four capscrews. Tighten the capscrews. Torque Value: 31 N•m [23 ft-lb] 00900157 Remove the covers on all the engine openings that were installed to prevent dirt and debris from entering the engine. 00900209 Diesel Engine 83 Complete Engine