Download CHAPTER 12

Transcript
Example:
G90 G1 X1.0 F50
; linear mill to X1 at 50 units/minute
H - Tool Length Offset Number
H is used to select the Tool Length Offset Number. The H code offset amounts are stored in the file
Offset Library. Tool Length Offsets can be specified anytime before a G43 or G44 is issued. Once
specified the offset amount is stored and will only be changed when another H code is entered. The
Tool Length Offset (H) can be placed on a line by itself or on a line with other G-codes. H00 is always
a 0.0 length offset.
Example:
G43 H1 Z3
G1X0Y1
H3
X1Y1.25
G0H5
; Selects offset corresponding to H1, moves to Z3
;
; Selects offset corresponding to H3.
;
; Selects offset corresponding to H5.
* NOTE: See Tool/Offset Library Edit (Chapter 4) for editing instruction for the offset library.
For information on length compensation functions see G43 and G44 in Chapter 13.
N - Block Number
Block numbers are used to identify CNC program lines. Block numbers are optional, but can be used
with the Search Function (See Main Screen Search option in Chapter 2). Block numbers also can make
reading the NC files easier.
Example:
N1 G90 G17 M25
N2 G0 X0 Y0 Z0
O - Program Number
The O program number allows you to identify your program with a certain number.
If the program number is 9100-9999, the G codes from the O number through the next M99 will be
extracted and placed in a separate subprogram/macro file. The lines will not be executed until the
resulting file is called with M98 or G65.
Example:
O1521
N1 G90 G17 M25
N2 G0 X0 Y0 Z0
P - Parameter
12-2
M-Series Operator’s Manual
6/7/12